BERGQUIST® HI FLOW THF 900
Known as Hi-Flow® 105
Features and Benefits
BERGQUIST HI FLOW THF 900, Phase Change Coated Aluminum
BERGQUIST® HI FLOW® THF 900 is a phase change material coated on both sides of an aluminum substrate. It is designed specifically to replace grease as a thermal interface, eliminating the mess, contamination and difficult handling associated with grease. BERGQUIST HI FLOW THF 900 is tack-free and scratch resistant at room temperature and does not require a protective liner in shipment when attached to a heat sink. At 65°C (phase change temperature), BERGQUIST HI FLOW THF 900 changes from a solid and flows, thereby assuring total wet-out of the interface. The thixotropic characteristics of BERGQUIST HI FLOW THF 900 reduce the pump-out from the interface. BERGQUIST HI FLOW THF 900 has thermal performance equal to grease with 0.10°C in2/W contact thermal resistance.
- Thermal impedance: 0.37°C-in2/W (@25 psi)
- Low volatility – less than 1%
- Easy to handle in the manufacturing environment
- Used where electrical isolation is not required
Documents and Downloads
Looking for a TDS or SDS in another language?
Additional Documents
Technical Information
| Color | Dark gray |
| Flame rating | V-0 |
| Operating temperature | 130.0 °C |
| Phase change temperature | 65.0 °C |
| Standard thickness | 0.139 mm |
| Thermal conductivity | 0.9 W/mK |
BERGQUIST® HI FLOW THF 900
BERGQUIST HI FLOW THF 900, Phase Change Coated Aluminum