Americas
Asia-Pacific
Europe
South Asia, Middle East & Africa
Gaskets are used to prevent leakage of fluids or gases by forming impervious barriers. For successful gasketing, it is necessary for the seal to remain intact, and leak-free over a long period of time. The gasket must be resistant to fluids and/or gases, and withstand the operating temperatures and pressures to which it is subjected.
Rigid Flange sealant is suitable for metal-to-metal assemblies and a gap fill of zero to 0.25 mm sealant dependent.
All repair and maintenance tasks shown should be done by professionals only. Please do not try this at home or if not qualified by professional education. Always follow car manufacturer's instructions.
Limitation of liability
Apply LOCTITE® SF 7200 on old gasketing adhesive and use a wood or plastic scraper to remove residues. Remove burrs. For thicker layers, several applications may be necessary. Ensure compliance with application instructions on the technical data sheet.
LOCTITE® SF 7063 recommended to degrease and clean surfaces prior to applying adhesive.
Apply a continuous bead of e.g. LOCTITE® 510 onto one flange surface. Place the bead close to the inner rim of the flange and encircle all holes. Alternatively, it can be applied by a roller onto larger flanges.
Assemble flanges and tighten bolts as soon as possible.
If disassembly is needed, remove the bolts with standard hand tools. Use jacking-screws or cast-on bosses and recesses to life flanges apart. For corroded or seized parts, use LOCTITE® 8040 Freeze & Release to loosen the bolts.
Limitation of Liability
The information provided herein, especially recommendations for the usage and the application of our products, is based upon our knowledge and experience. Due to different materials used as well as to varying working conditions beyond our control we strictly recommend to carry out intensive trials to test the suitability of our products with regard to the required processes and applications. We do not accept any liability with regard to the above information or with regard to any written or verbal recommendation, except if otherwise explicitly agreed and except in relation to death or personal injury caused by Henkel´s gross negligence or intention and any liability under any applicable mandatory product liability law. Please note that the information provided by us may not be current, complete and correct. It is not intended to serve as legal advice. Each user is solely responsible for assessing and ensuring compliance with any applicable law. The information is protected by copyright. In particular, any reproductions, adaptations, translations, storage and processing in other media, including storage or processing by electronic means, enjoy copyright protection. Any exploitation in whole or in part thereof shall require the prior written consent of Turk Henkel Kimya Sanayi AS. Except as otherwise noted, all marks used in this sell sheet are trademarks and/or registered trademarks of Henkel and/or its affiliates.
