BERGQUIST® GAP PAD® TGP 2000
Poznano kot Gap Pad® 2000S40
Lastnosti in prednosti
This silicone-based, highly conformable, reinforced gap-filling material is recommended for low-stress applications requiring a mid- to high thermally conductive interface material.
BERGQUIST® GAP PAD® TGP 2000 is highly conformable, so the pad can fill air voids and air gaps with stepped topography, rough surfaces and high stack-up tolerances. It has inherent natural tack on both sides of the material, allowing for stick-in-place characteristics during application and assembly. It’s supplied with protective liners on both sides, and the top side has reduced tack for ease of handling.
Preberite več
Dokumenti in prenosi
Ali iščete tehnični list ali varnostni list v drugem jeziku?
Tehnične informacije
Barva | Siva |
Delovna temperatura | -60.0 - 200.0 °C |
Dielektrična konstanta, @ 1kHz | 6.0 |
Gostota | 2.9 g/cm³ |
Napetost dielektrične razgradnje | 5000.0 Vac |
Ocena plamena | V-0 |
Prostorninska upornost | 1×10 Ohm m |
Standardna debelina | 0.508 - 3.175 mm |
Toplotna prevodnost | 2.0 W/mK |
Toplotna zmogljivost, ASTM E1269 | 0.6 J/g-K |
Trdota po Shoru, Thirty second delay value, ASTM D2240 Razsuta guma Shore 00 | 30.0 |