LOCTITE® CL28 CureJet LED Spot Curing Single Controller
Elementi i pogodnosti
Designed for simple and easy control of LOCTITE® CL28 CureJet LED Spot Curing Light Sources for curing UV and visible light cure adhesives.
The LOCTITE® CL28 CureJet LED Spot Curing Single Controller is used with the LOCTITE CL28 CureJet LED Spot Curing Light Sources to cure UV and visible light cure adhesives. When the unit is switched on, the proper electrical power is supplied to the LED, resulting in immediate full power. The digital timer (0.1 to 999.9 seconds) allows for setting the exposure time to the ultimate value required for proper curing. This controller can be actuated by a manual start button, a foot switch (included), or an external controller such as a customer-supplied PLC.
Pročitajte više
Dokumenti i preuzimanja
Ne postoje dokumenta i preuzimanja dostupna za Vašu lokaciju i jezik. Možete pokušati na drugom jeziku
Tehnički podaci
| Blag intenzitet, For 380nm source | 1.0 - 18.0 W/cm² |
| Blag intenzitet, For 405nm source | 1.0 - 27.0 W/cm² |
| Koristi se za izlivanje | Lepkovi za blago konzerviranje sa UV i vidljivim svetlom |
| Primene | Očvršćavanje LED sijalica |
| Talasna dužina, Item #2183339 | 380.0 nm |
| Talasna dužina, Item #2183340 | 405.0 nm |
| Tip rada | UV Vis |
| Tip sijalice, Preporučeno | LED |
LOCTITE® CL28 CureJet LED Spot Curing Single Controller
Designed for simple and easy control of LOCTITE® CL28 CureJet LED Spot Curing Light Sources for curing UV and visible light cure adhesives.