LOCTITE® EA 3471 Steel Putty
Known as LOCTITE 3471
Features and Benefits
Two-part, non-sagging, steel-reinforced epoxy repair putty that cures to a metal-like finish and can be machined, drilled, tapped or filed. Easy to apply with no need for heating or welding.
LOCTITE® EA 3471 is a 2-part, grey, non-sagging epoxy putty which is easy to apply with no need for heating or welding. Typical applications include repairing non-structural defects in castings, making jigs and fixtures, sealing vessels, tanks and valves, resurfacing worn air seals and filling cavitated areas. This product is typically used in applications with an operating range of -30 to +105°C.
- Cures to a metal-like finish
- Superior adhesion on metal surfaces
- Bonds well to all metal substrates
- Will not sag or shrink
Documents and Downloads
Looking for a TDS or SDS in another language?
Technical Information
| Fixture time | 180.0 min. |
| Mix ratio, by volume | 1 : 1 |
| Shear strength | 20.0 N/mm² |
| Work life | 45.0 min. |
LOCTITE® EA 3471
Two-part, non-sagging, steel-reinforced epoxy repair putty that cures to a metal-like finish and can be machined, drilled, tapped or filed. Easy to apply with no need for heating or welding.