BERGQUIST® SIL PAD® TSP 1100ST

BERGQUIST® SIL PAD TSP 1800ST and BERGQUIST® SIL PAD TSP 1100ST have an inherent tack on both sides of the material. This inherent tack is used instead of an adhesive. The tack provides sufficient adhesive for dispensing from the carrier liner and placement on the component. BERGQUIST® SIL PAD® TSP 1800ST and BERGQUIST® SIL PAD TSP 1100ST can be repositioned after the initial placement.

The ISO certification is the adoption of a quality management system that is a strategic decision of the organization. This International Standard specifies requirements for a quality management system where an organization: a) needs to demonstrate its ability to consistently provide product that meets customer and applicable regulatory requirements, and b) aims to enhance customer satisfaction through the effective application of the system, including processes for continual improvement of the system and the assurance of conformity to customer and regulatory requirements.

BERGQUIST® SIL PAD TSP 1800ST and BERGQUIST® SIL PAD TSP 1100ST wet-out the application surfaces at very low pressures. Optimal thermal performance is achieved at pressures as low as 50 psi.

Each application has specific characteristics (e.g., surface finish, flatness tolerances, high pressure requirements, potential burrs, etc.) that determine which SIL PAD product will optimize thermal performance. Select a minimum of two pads that best fit the application, then conduct testing to determine which material performs the best.