Contact us
Please fill out the form below and we’ll respond shortly. Or get in touch on Facebook today!
Americas
Asia-Pacific
Europe
South Asia, Middle East & Africa
Application method | Post applied |
Application temperature | -55.0 - 150.0 °C (-65.0 - 300.0 °F ) |
Applications | For pre-assembled fasteners, Porosity sealing, Threadlocking |
Breakaway torque, M10 Steel Nuts/Bolts | 10.0 N·m (90.0 in./lb. ) |
Color | Green |
Cure type | Anaerobic cure |
Fixture time | 20.0 min. |
Key characteristics | Disassembly: disassembly with heat, Fluorescent, Strength: medium to high strength, Viscosity: low viscosity, Wicking / penetrating grade |
Physical form | Liquid |
Prevail torque, M10 Steel Nuts/Bolts | 29.0 N·m (260.0 in./lb. ) |
Recommended for use with | Metal: brass, Metal: steel, Metal: steel - stainless steel |
Viscosity, Speed 20 RPM | 40.0 mPa·s (cP) |
It is recommended to use LOCTITE® SF 7063/7064/7070 to degrease and clean surfaces prior to applying adhesive.
For assembled nut and bolt, dispense a low-viscosity wicking grade threadlocker, such as LOCTITE 290, at the nut and bolt juncture.
Disassemble with standard hand tools.
If disassembly is not possible using normal hand tools, apply localized heat to approximately 260°C. Disassemble while hot with standard hand tools.
For the disassembly of corroded or seized parts use LOCTITE® LB 8040 Freeze and Release.
Please fill out the form below and we’ll respond shortly. Or get in touch on Facebook today!