LOCTITE® 248 Threadlocker
Features and Benefits
- Convenient, non-drip, stick format
- Prevents fastener loosening on vibrating assemblies, e.g. pumps, gear boxes, presses
- Works on all metals without primer, including passive substrates
- Suitable for use on most oil-coated, 'as-received' fasteners without cleaning
- Can be disassembled with ordinary hand tools for easy service and maintenance
Documents and Downloads
Looking for a TDS or SDS in another language?
Technical Information
Application method | Swipe |
Application temperature | -55.0 - 150.0 °C (-65.0 - 300.0 °F ) |
Applications | Threadlocking |
Breakaway torque, Breakloose torque, M10 Steel Nuts/Bolts | 23.0 N·m (200.0 in./lb. ) |
Color | Blue |
Cure type | Anaerobic cure |
Fixture time | 5.0 min. |
Key characteristics | Disassembly: removable, Strength: medium strength |
Physical form | Semi-solid stick |
Recommended for use with | Metal, Metal: passive metal |
How to
Step by Step Guide
1. Preparation - Cleaning
It is recommended to use LOCTITE SF 7063 or LOCTITE SF 7070 to degrease and clean surfaces prior to applying threadlocker.
2. Preparation - Activation
If cure speed is too slow due to passive metals (stainless steel, aluminum and plated metals) or low temperature (below 5°C), use LOCTITE SF 7649 activator. Allow to dry.
3a. Application - Through Hole
Apply a 360 degree band of threadlocker to the male fastener at the area of engagement and completely fill the thread roots - generally the width of 2-3 threads. Assemble nut and tighten to proper torque.
3b. Application - Blind Hole
Apply threadlocker to entire diameter of thread engagement area on male fastener, install fastener into blind hole, and tighten to proper torque.
4. Assembly
Assemble and tighten to proper torque requirement. If several bolts are being assembled, torque them down to the correct value within the fixture time window.
5. Disassembly
Disassemble with standard hand tools. If not possible, apply localized heat to approximately 500°F/260°C and disassemble while hot.