LOCTITE® RC40 Integrated Semi-Automatic Dispenser
Features and Benefits
The LOCTITE RC40 Integrated Semi-Automatic Dispenser is a combination of a dual channel dispense controller and a dispense reservoir.
The LOCTITE® RC40 Integrated Semi-Automatic Dispenser combines a dual channel dispense controller and a dispense reservoir into a single unit. The controller provides two (2) independent digital timing channels that provide control of two (2) pneumatic outputs. These outputs can be used to control dispense valves or any other pneumatic device. The controller can be actuated either by a foot switch (included), a manual or pneumatic finger switch, or external start signal. It can operate in a continuous or timed mode for dot or bead dispensing applications. The reservoir can accommodate 250ml, 500 g, 1 l, 2 kg and 200 g adhesive packages which deliver adhesive to dispensing valves.
- Low-level sensor alarm provides warning for adhesive bottle replacement
- Two independent digital timing channels
- Easy-to-use keypad with LCD display screen for entering values
- Included in the Box: (1) RC40 Integrated Semi-Automatic Dispenser, (1) reservoir tank fitting: 6,35mm NPT x 6,35 mm tubing, (1) universal power AC adapter, (1) foot switch, (1) bottle nesting basket, (1) anti-bubbler fitting and tube kit, (1) 6,35 mm NPT to 6 mm inlet supply line connector, (1) operating manual
- Integrated reservoir and controller solution in one system
- Interface connections for customer’s PLC to indicate reservoir low level condition and cycle complete signal
- Equipped with a 0-7 bar (0-100 psi) analogue pressure gauge
- Simple menu-driven commands
- Time range is adjustable from 0.01 to 99.99 seconds
- Delay setting allows positioning of an advancing slide prior to the opening of dispense valve
- Can be run in Continue or Time mode
- Manual button for purging adhesive from valves
- Components required for operation: (1) dispenser, (1-2) valves
- RoHS compliant
Technical Information
Applications | Dispensing adhesives |
Dispense patterns | Beads, Dots |
Fluid pressure | 0.0 - 100.0 psi (0.0 - 7.0 bar ) |
Key characteristics | Low level sensing |
Operating type | Pneumatic |
Used to dispense | Cyanoacrylates, Retaining compounds, Threadlockers, UV and visible light cure adhesives |
Works with package types & sizes | Bottle, 1 l, Bottle, 2 kg, Bottle, 250 ml, Bottle, 500 g, Squeeze tube, 200 g |