LOCTITE® EA 3463
Known as LOCTITE 3463 Metal Magic Steel Stick
Features and Benefits
A 2-part, steel-filled epoxy repair putty that is easy-to-use and stops leaks in pipes and tanks, fills oversized bolt holes, smooths welds, and repairs non-structural defects in castings or holes in tanks.
LOCTITE® EA 3463 is a versatile, easy-to-use, steel-filled epoxy kneadable stick. It is applied like a putty and, when cured, exhibits high compressive strength and great adhesion to most surfaces. It has an operating temperature range of -30 °C to 120 °C (-22°F to 248°F), cures in 10 minutes, adheres to most damp surfaces and will even cure under water
- Steel-filled kneadable stick
- Operating temperature range of -30 °C to 120 °C (-22°F to 248°F)
- For emergency repair of tanks, pipes & castings
- Cures in 10 minutes
- Cures on damp surfaces and under water
Documents and Downloads
Looking for a TDS or SDS in another language?
Technical Information
| Application method | Manual |
| Applications | Repairing |
| Cure type | Room temperature (ambient) cure, Two component mix |
| Fixture time | 10.0 min. |
| Physical form | Putty |
| Recommended for use with | Metal |
| Work life | 3.0 min. |
| Mixed | |
| Color, Mixed | Black |
| Key characteristics, Mixed | Compressive strength: high, Cure speed: fast cure, Emergency repair, Kneadable, Underwater curing |
How to
Step by Step Guide
1. Preparation - Cleaning
It is recommended to use the correct LOCTITE® cleaner for the surface to be bonded (such as LOCTITE® SF 7063 or SF 7070) to degrease and clean surfaces prior to applying the adhesive.
2. Mixing
Use gloves - do not mix with bare hands. Cut required amount of material from stick. Remove clear plastic wrapper from cut section. To mix, first twist the material to produce a spiral pattern of resin and hardener. Next, knead material for 2 to 3 minutes or until a uniform color is achieved.
3. Application & Finishing
Firmly apply for patch, repair or bonding. For a smooth finish, wet a cloth or gloved finger with water and smooth.
Frequently Asked Questions
Will LOCTITE EA 3463 Epoxy adhere to wet surfaces?
LOCTITE® EA 3463
A 2-part, steel-filled epoxy repair putty that is easy-to-use and stops leaks in pipes and tanks, fills oversized bolt holes, smooths welds, and repairs non-structural defects in castings or holes in tanks.