LOCTITE® ABLESTIK NCA 2380
Características e Benefícios
This epoxy, electrically non-conductive adhesive is designed for assembling temperature-sensitive electronic components. An initial temporary cure allows for adjustments to the final device configuration.
LOCTITE® ABLESTIK NCA 2380 dual cure adhesive is perfect for use in the assembly of temperature-sensitive electronic components. It has good flow performance, excellent adhesion, and is formulated to temporarily cure when exposed to UV light, followed by a secondary thermal cure at low temperature. This means you can make any necessary adjustments to the final device configuration before committing it to full cure.
Ler mais
Documentos e Downloads
Procurando por um TDS ou MSDS / FISPQ em outro idioma?
Informação Técnica
| Coeficiente de expansão térmica (CTE) | 56.0 ppm/°C |
| Coeficiente de expansão térmica (CTE), Above Tg | 183.0 ppm/°C |
| Modulo de armazenamento | 3.0 GPa |
| Temperatura de transição do vidro (Tg) | 95.0 °C |
| Tipo de cura | Cura UV + Calor |
| Viscosidade, Shear Rate 10 s⁻¹ | 35000.0 mPa.s (cP) |
| Índice tixotrópico | 2.4 |
LOCTITE® ABLESTIK NCA 2380
This epoxy, electrically non-conductive adhesive is designed for assembling temperature-sensitive electronic components. An initial temporary cure allows for adjustments to the final device configuration.